Features:
Size: DN15~50mm
Pressure Rating: ≤1.6Mpa (16 bar)
Material: Brass
Design Standard: Standards Compliance
Inspection Standard: Technical data conform to international standard lSO 4064
Application medium: Water
Application Temperature: 0.1 C~40C for cold water meter
Emcor Hass group Valves and Pipe Fittings:
valves in Kenya | Water Meters in Kenya | Stainless Steel Threaded Water Meters in Kenya | Gate valves in Kenya | single flange butterfly valves |
PEGLER valves in Kenya | HDPE End Caps in Kenya | Valves and Pipe Fittings.
Product Details
Brief introduction of Stainless Steel Threaded Water Meter:
Characteristic:
Stainless Steel Threaded Waters
–The structure is simple.
–Easy to manufacture and maintain, low cost.
–Durable, low water quality requirements.
–The error is easy to adjust.
–The flow ratio is relatively large.
–The requirements for the straight pipe section are low.
Service conditions:
–The water pressure shall not be greater than 1.0MPa.
–The cold water meter will not exceed 30 degrees.
–Hot water not exceeding 90C meters.
Emcor Hass group Valves and Pipe Fittings:
valves in Kenya | Water Meters in Kenya | Stainless Steel Threaded Water Meters in Kenya | Gate valves in Kenya | single flange butterfly valves |
PEGLER valves in Kenya | HDPE End Caps in Kenya | Valves and Pipe Fittings